Lättbalk AB

Explore our solid range of beams and steel profiles


Gå direkt till sidan om C-balk

Hot-dip galvanized C-profile / C-beam at heights from 100 to 400 mm and thickness from 1.5 to 3 mm.


Gå direkt till sidan om U-balk

Hot-dip galvanized U-profile / U-beam in heights from 50 to 150 mm and thickness from 0.8 to 3 mm.


Gå direkt till sidan om Z-balk

Hot-dip galvanized Z-profile / Z-beam in heights from 100 to 400 mm and thickness from 1.5 to 3 mm.


Gå direkt till sidan om L-profiler

Hot-dip galvanized L-profile at heights from 50 to 150 mm and thickness from 0.8 to 3 mm.


Gå direk till sidan om sigmabalk

Hot-dip galvanized Sigma profile / Sigma beam in heights from 160 to 400 mm and thickness from 1.5 to 3 mm.


Gå direkt till sidan om Omegaprofiler

Hot-dip galvanized Omega profile / Omega beams in heights from 150 to 250 mm and thickness from 0.8 to 3 mm.

Why galvanized steel profiles?

For lightweight beams give low weight and high strength while saving both time and money as well as equipment as no extra device for heavy lifting is required.

The steelprofiles offer endless possibilities. The low weight together with the high strength make steelprofiles the obvious choice for your project.

The use of lightweight steel profiles also ensures smooth assembly. Save time, money, equipment and personnel against the use of traditional heavy steel beams.

Steel profiles are, on the contrary, completely moisture resistant to wooden beams, do not swell and always retain their original shape, in addition you never have to worry about mold.

Our steel profiles is advantageously used for the construction of facades, roofs, partitions, floors, floor structures and entrance halls, among other things.



Light steel profiles give a superior construction

Steel - a material you can trust

Steel is a material to be reckoned with, it is moisture resistant and never, for natural reasons, is affected by mold attacks. Lightweight steel neither shrinks nor swells and retains its strength and shape year after year, a maintenance-free alternative simply!

Some of the advantages of lightweight steel:


Lightweight beam has a low weight

Quick assembly


Saves time and money

Efficient logistics

Is superior wooden beam

Keeps the shape

Ett entresolbjälklag av lättbalk i stål

Ett entresolbjälklag av lättbalk i stål

We offer affordable lightweight steel profiles

We offer affordable lightweight beams in hot-dip galvanized material with low weight and high strength. Always fast delivery and good and personal service!

With us you will find affordable steel profiles in the form of hot-dip galvanized C-profile, Z-profile, U-profile, L-profile and Sigma profile and Omega profile in varying dimensions. We can supply beams in lengths according to your wishes. Read more on each product page where you also find technical data for our different beam types. Hot dip galvanizing takes place in class Z275, which corresponds to a zinc thickness of about 20 μm.

We are happy to assist in calculating which beam dimension you just need according to the current load requirements and are happy to draw a drawing on your preferred hole image.

We can usually keep very short delivery times while keeping prices down. Contact us with your wishes today for a profitable and lasting collaboration!



Special profiles according to your drawings and requirements

We help to create custom profiles according to your specification on length and cross-section. We also help to a certain extent with the help of current load calculation. The basic material for our beam is supplied in coils from well-known Scandinavian and Western European manufacturers; the metal thickness varies from 0.5 to 3.2 mm, the maximum profile length is 12.36 m.


Manufacture takes place via roll forming

Our steel profiles is produced via roll forming, which is a manufacturing method in which sheet (from coils) is folded step by step in a sequence of roll pairs until the desired profile cross section is achieved. This manufacturing method ensures precise tolerances and allows for complex cross sections and high precision. Holes and shapes are also punched into the profile to facilitate the installation of the beams, for example.

What are the benefits of roll forming?

Due to application-adapted cross sections and integrated functions such as holes and, for example, embossing, a high utilization of material with very little spillage and high production speeds make this manufacturing method a very economical method. Roll forming is also a gentle manufacturing method, which means that the risk of crack formation is very low.

Rullformning som tillverkningsmetod av lättbalk

Rullformning som tillverkningsmetod av lättbalk

Technical data and tables for our steel profiles

Tekniska data för lättbalk

We have produced data and technical tables that can be of great help when you want to determine the beam dimension, here you will find all the necessary dimensions, cross-sectional data and weights and more. If you would like further assistance with advice or calculation regarding which beam is required in your particular project, you are welcome to contact us by phone or e-mail.

Click "Hämta" below to view the tables

C-profile technical data (pdf)


U-profile technical data (pdf)


Z-profile technical data (pdf)


L-profile technical data (pdf)


Sigmaprofile technical data (pdf)


Omegaprofile technical data (pdf)